SPECIFICATION:
Motor :120V, 60Hz, 2000W
Rated Pressure :3000 PSI
Maximum Pressure :3800 PSI
Water Temperature Range :40°F(4°C) - 104°F(40°C)
Max Flow Rate :3.0 GPM
Maximum Inlet Water Temperature :104° F(40°C)
Hose Length :16.4 ft (5m)
Power Cord Length :35 ft (10.6 m)
Soap Tank Capacity :0.26 gal.(1.0 L)
PACKAGE:
1 x High Pressure Washer
1 x 10.6m Electric Cord
1 x Spray Gun
1 x Detergent Bottle
4 x Nozzles and 1 x Black Nozzle
1 x Universal Threaded Hose Connector
1 x 5m High Pressure Hose
1 x Manual
ASSEMBLY STEPS:
1. ASSEMBLING THE UPPER&LOWER POWER CORD HOLDER.Use the Screwdriver(provided) to assemble the two power cords holder on the washer body with 2 bolts.
2. ASSEMBLING THE HOSE GUN ON THE UPPER HANDLE.Use the Screwdriver(provided) to assemble hose holder on the washer body with 4 bolts.
3. ASSEMBLING UPPER HANDLE ON THE WASHER BODY.Use the Screwdriver (provided) to fix the upper handle on the washer body with 4 bolts.
4. ASSEMBLE THE NOZZLE HOLDER.Use the Screwdriver(provided) to fix the nozzle hold on the washer body with 2 bolts.
5. ASSMEBLING THE GUN HOLDER AND DETERGENT BOTTLE.
6. ASSMEBLING THE SPRAY GUN.Insert the spray lance into the spray gun and lock them in position.
7. COLLECT THE PRESSURE HOSE WITH THE WASHER.Twist on tight to avoid leakage.
8. COLLECT THE PRESSURE HOSE WITH THE WASHER.Fasten the hose on the gun using the spanner provided to avoid water leaking.
9. ASSEMBLE THE WATER INLET CONNECTOR.